Magnettic Drilling

MB30 Has an Hitachi power unit and a powerful magnet with a clamping force of 1,000kgs/ 2,200lbs. A safety relay and an automatic cut-out gives maximum operator protection. Supplied with arbor and support, safety chain, carabina hook, cutting oil, chuck and key, allen keys and carrying case. Dimensions (H x W x L): 295 x 100 x 235mm. Power input: 750W. (Mesin Bor)

MBE100 Unique power unit gives constant torque and speed regulation even under load. Powerful magnet has a clamping force of 1,410kg/3,100lbs. This machine has a slow start and infinite variable speed. It has a slipping clutch to protect against breakage of cutters and comes complete with an oil coolant system to automatically lubricate the cutters. The gearbox is mounted directly onto the cradle for extra rigidity. Supplied with three morse taper arbor, morse drift key, safety chain, carabina hook, hexagon keys, carry case. Dimensions (H x W x L): 500 x 135 x 312mm. Power input: 1,800W. (MEsin Bor)

Faster, easier and are more accurate and dramatically outperform conventional twist drills, in terms of cutting speed and tool life. Used on structural steel, plate, tubing or material that requires a fine finish hole. Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. An Ideal choice for all magnetic based drilling applications in general engineering, construction and fabrication. Sizes Available: 12 - 52mm. Bore: 1/4" (6.35mm). Depth of Cut: 50mm. Overall Length: 85mm. 3/4in Weldon Shank. (Mesin Bor)

Faster, easier and are more accurate and dramatically outperform conventional twist drills, in terms of cutting speed and tool life. Used on structural steel, plate, tubing or material that requires a fine finish hole. Cutting edge geometry increases cutting performance and reduces cutting forces producing a solid Slug of material which is ejected when the cutter breaks through and the hole is complete. An Ideal choice for all magnetic based drilling applications in general engineering, construction and fabrication. Sizes Available: 12 - 52mm. Bore: 1/4" (6.35mm). Depth of Cut: 25mm. Overall Length: 60mm. 3/4in Weldon Shank. (Mesin Bor)

Short series annular HSS cutter set with 19mm Weldon shank compatible with all magnetic based drilling and broaching units. Complete with pilot pin and fitted metal case. Cutter sizes: 14, 16, 18, 20, 22 and 24mm. Bore: 1/4" (6.35mm). Depth of Cut: 25mm. Overall Length: 60mm. 3/4in Weldon Shank. (Mesin Bor)

For use with Mag Base broaching units, Piller Drills, drill presses, lathes etc. (Mesin Bor)

For use with all multi-tooth cutters with 6mm bore. Pilots locate into pre-drilled pilot holes ensuring positional accuracy of the cutter. Suitable for 'blind' or 'through' pilot holes, pin will retract into cutter adaptor on 'bottoming'. Short series = 77mm. Long series = 102mm. (Mesin BOr)

MBE40 Has a unique two speed power unit with variable speed control and a powerful magnet with a clamping force of 1,410kg/3,100lbs. Automatic safety is provided by revolutionary electronic switching system, supplied with two morse taper arbor, morse taper drift, safety chain, carabina hook, cutting oil, hexagon keys and carry case. Dimensions (H x W x L): 418 x 100 x 281mm. Power input: 1,050W. Capacities: Drilling 3 - 23mm. Milling 13 -45mm. No load speed: 280 - 640rpm (Mesin Bor)

Suitable for industrial use, this compact 2-speed machine can drill holes up to 50mm diameter. It has powerful magnets with a clamping force of 17,000N/1,730kg and comes supplied with safety guard, coolant tank, safety chain and portable case. Cutter capacity: up to Ø50mm x 50mm Depth. Twist drill: Ø13mm x 140mm Depth. Countersink: Ø65mm Weldon shank: 19mm. Dimensions: 438 x 280 x 255mm. Weight: 15.28kg. (Mesin Bor )  

Suitable for light industrial use, these machines have a powerful 1200W motor providing enough power to drill holes up to 35mm diameter. They have a gravity feed coolant bottle, 13mm chuck, key and weldon adaptor, safety chain, drilling guard and hexagon keys. Specification: Motor: 1200W. Arbor: 19mm weldon. Chuck size: 13mm (1/2"). Speed: 595rpm. Magnetic adhesion: 13,000N. Weight: 17 Kg net. Drilling capacities: Core drill 12 - 35mm Twist drill 1.5 - 13mm Countersink 10 - 40mm Cutting depth: 50mm. Stroke: 165mm. Sound pressure (LPA): 109.5dBA. Sound power (LWA): 107.8dBA. Vibration level: 1.5m/s2.   (MEsin Bor)