Engineer's Hand Tools

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.Jangka Sorong

Manufactured from high quality polished steel with ground finished points. A circular spring bow joins the legs and a fine adjusting screw is mounted across the legs and is used for setting the distance between the two points.Jangka Sorong

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.Jangka Sorong

Adjustable Point & Spur Manufactured from high quality steel, with a polished finish. Consisting of two legs which are held together by a large nut and screw to provide a firm friction joint. This firm joint caliper has an adjustable ground point which can be retracted for storage and the other leg is angled at the tip. The legs can be reversed, so the tip turns inwards or outwards. Firm joint calipers are used for scribing arcs and parallel lines by using the edge of the workpiece as a guide, and are also used for measuring from the centre point of a component.Jangka Sorong

Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts. Circular Mirror With high power magnet and pocket clip. Mirror diameter: 30/50mm.  Inspection Mirror

Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts. Rectangular Mirror Mirror size: 90 x 50mm.  Inspection Mirror

Standard With flexible shafts which can be adjusted into any position. Available as standard or with light attachment. Has high grade distortion-free glass mirrors with chrome plated shafts.  Inspection Mirror

Manufactured from chrome vanadium steel. Used for punching out pins and dowels. Set - Supplied in plastic wallet. Contents: 2, 3, 4, 5, 6 and 8mm.  Alat Alat Kerja Lainnya

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066. Contents 2.4, 3.2, 4.0, 4.8, 5.5 & 6.4  Alat Alat Kerja Lainnya

Manufactured from chrome vanadium steel. Used for aligning holes in jigs and fixtures etc. Taper Punch Set Contents: 1x 3, 4, 5, and 6mm.  Alat Alat Kerja Lainnya