Automotive - Pullers & Separators

10 ton capacity hydraulic ram with tommy bar. Suitable for agricultural machines, garage and industrial use. Contents: 1x hydraulic ram (KEN- 503-7200K). 3x 4”, 6” and 8” puller legs. 1x twin head. 1x triple head. 1x 50mm ram extension. 1x 100mm ram extension. 2x 200mm main rods. 2x 230mm extension rods. 1x 75 - 105mm separator. 1x bolt. 1x ram ring. 1x ram nut. Blow moulded storage case.Alat Alat Kerja Lainnya

3 Jaw Internal & External Multi-function Slide Hammer Puller Set Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case. 6 Piece Set Contents: 1x T-bar. 1x hammer 1.2kg. 1x 3 jaw internal puller 15 - 30mm. 1x 3 jaw internal puller 30 - 80mm. 1x 3 jaw external puller 15 - 80mm. 1x blow moulded case.  Alat Alat Kerja Lainnya

Industrial Reversible/Double-Ended Adjustable Used for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. With reach capacities of 75, 100, 150 and 200mm. All sizes have double-ended, adjustable, reversible legs and can be used for internal and external applications. Selection Always use a three jaw puller whenever possible. This produces better load distribution across the jaws and easier and safer removal of the part. Determine what 'spread' is needed - this is the width of the part to be removed. The reach capacity is determined by the depth of the part to be removed. All pullers can be assembled for internal or external use. 3 Jaw Pullers - Supplied with both 3-legged yoke 3 Jaw - Internal Assembly 3 Jaw -External Assembly  Alat Alat Kerja Lainnya

Reversible Manufactured from drop forged hardened alloy steel. Three position extra long legs to be used where access is limited. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. The legs are then retracted with the bearing by turning the T-bar to extend the thrust bolt on to fixed shaft. Spread: 10 - 50mm. Reach: 300mm.  Alat Alat Kerja Lainnya