Automotive - Jacks & Stands

Ideal for car and light commercial transmission removal and installation. Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains. Foot operated pump and release valve leaves both hands free to manoeuvre transmission. Wide base with four 3” dia. swivel-type ball bearing castors providing stability and easy manoeuvring. Two-stage flash chromed rams inhibit rust from entering the hydraulic system. Lifts from 875 to 1800mm. Contents TTJ500 Capacity...1/2 Tonne Ram Extensions...2 Minimum Saddle Height...875mm Maximum Saddle Height...1800mm Saddle Size...680x810mm Chain Length...95mm Saddle Tilt Forward...24” Saddle Tilt Back...19” Saddle Tilt Side...+/- 20” Saddle Return Weight...15.8kg (35lbs) Base...695 x 805mm Weight...68.5kg  Alat Hidrolik

QLT450 3 tonne capacity. Made of a lightweight aluminium and steel construction. Its low profile makes it ideal for any type of car, including sports and race cars, and its swivel castor wheels enable easier positioning under vehicles. It also has a quick lift with dual pump and a rubber hand grip for user comfort. Dimensions 685 x 345 x 180mm.  Dongkrak

3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Constructed from heavy gauge steel. 1m, two-piece handle. 120mm diameter saddle. Automatic safety overload protection. Positive twist, lock and release mechanism. Heavy duty rear swivelling castor wheels. Maximum load: 3000kg. Minimum height: 145mm. Maximum height: 490mm.  Dongkrak

Made from heavy-duty steel with a rubber saddle which provides a positive grip and prevents damage to jacking points. Designed to safely raise vehicles. Easy to use and compact for easy storage. 1 Tonne (1000kg) safe working load. Wide base plate for extra stability. Lifting range: 88 - 383mm. Base plate size: 150 x 90mm. Spindle thread: 12.5 x 2.5mm.  Dongkrak

Low Profile Trolley Jacks have strong, robust steel chassis to provide stability when under load. A low entry height. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. Available 2 & 2.5 Tonne   Dongkrak  

A low entry height Trolley Jack. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. Dimensions T510L: 1010 x 365 x 135mm T525L: 1150 x 350 x 180mm.Available : 2 & 3 Tonne  Dongkrak

For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, 'T' bar handle with integral air control valve and two extensions for increased lifting height. It requires an air pressure of 116 - 174psi (8 - 12bar) and a supply rate of 105ltr/min (3.7cfm). JTA2040 Air supply: 116 - 174psi (8 - 12bar). Air consumption: 105ltr/min (3.7cfm). Lifting capacity: 20T/40T. Base height: 210mm. Lifting height: 40T - 433mm, 20T - 520mm. Air inlet size: 1/4NTP. Dimensions JTA2040: 860 x 350 x 310mm  Dongkrak

Suitable for supporting raised vehicles or equipment. Protective red enamel coating. 10-position ratchet design that automatically locks when raised.Available : 2,3 & 6 Tonne   Dongkrak

Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lowering. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved. T238 Type: with case. Dimensions: 525 x 225 x 145mm. Maximum load: 2,000kg. Minimum height: 130mm. Maximum height: 380mm. T2.249 Type: with case. Dimensions: 695 x 344 x 180mm. Maximum load: 2,250kg. Minimum height: 145mm. Maximum height: 495mm. T280 Type: long reach. Dimensions: 1150 x 360 x 210mm. Maximum load: 2,000kg. Minimum height: 140mm. Maximum height: 800mm.Available : 2, 2.5 & 3 Tonne   Dongkrak

Featuring steel chassis for stability, swivel castors for easier positioning and 1 piece handle with rubber grip for extra comfort. With overload protection valve, separate release mechanism and integral carry handle. STJ330 (2 tonne): Max load: 2000kg Min height: 135mm Max height: 330mm Weight: 8.5kg STJ410 (3 tonne): Max load: 3000kg Min height: 130mm Max height: 410mm Weight: 15.84kg.Available : 2 & 3 Tonne  Dongkrak