Air Hose & Balancers

Auto layering mechanism to prevent jamming. Working pressure 8 bar (120 PSI). Suitable for water up to 45°C. 180° pivoting wall bracket included - can be fixed to walls or ceilings. Inlet and outlet connection 1/4 BSP. Conforms to BS EN ISO 12100: 2010. (Alat ALat Kerja Lainnya)

Reinforced with a polyester fibre braid. Used in pneumatic airline systems, crop spraying, transportation of gases and liquids, decanting of acids, salts and many other chemicals. Fully approved for food contact applications. Operating temperature range of -20°C to +60°C. Supplied in 30m (100ft) reels. ( Alat Alat KErja Lainnya )

Air Tool Whip Hoses which distances an air tool from its air supply to prevent vibration is highly recommended by Health and Safety. The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. Helps to prolong the life of couplings and adaptors Increases comfort of use Enables you to use the tools safely. Simply "Plug-in and go" ( Alat Alat Kerja Lainnya )

Designed for professional garages/workshops, the hose can be extended and stopped at any length with a controlled slow rewind which returns it at a safe speed. The auto layering mechanism distributes the hose evenly back into the reel housing to prevent jamming. The rubber hose is rated to 18-54 bar (261-783 psi) and a 180° pivoting wall bracket is included. Conforms to BS EN ISO 12100:2010. Temperature range -5 to 45°C. Inlet and outlet connecton 1/4BSP. ( Alat Alat KErja Lainnya )

Open drum 20m air hose reel. Easy wind reel mechanism. With high impact resistant drum and guide walls. ½" air hose fitted with two ear hose clips and standard PCL couplings for ½" hose. 15bar working pressure. The axial supply allows the hose to be wound and unwound during operation. Supplied complete with 1.5m supply connection hose and wall mounting hooks. Temperature range -20 to 60°C. ( Alat Alat KErja Lainnya )

Solid brass couplings with 360° swivel and spring protectors allow use in any direction. Ideal for use in awkward access areas. Recoils to a fraction of its working length when not in use leaving the work place clear of entanglement hazards. Extended length: 7.5m. Pressure rating: 8.0mm diameter - 250psi. 9.5mm diameter - 150psi.         ( Alat Alat Kerja Lainnya )

With adjustable tension return, it retracts when the air tool is released, leaving the work place clear of unwanted lengths of air hose. Ideally suited for in-line production. With spring loaded safety clip for overhead fixing. Hose length: 1.5m. Hose I.D.: 5mm. Hose O.D.: 8mm. Maximum pressure: 200psi. Hoist range: 0-1.5kg.                        ( Alat Alat KErja Lainnya )

Fitted with a G1/8” brass thread, can be used to measure psi and bar readings and can be fitted directly onto any filter regulator - lubricators. Available in two face sizes (40mm and 50mm), made from tough ABS plastic. Back entry fittings. ( Alat Alat KErja Lainnya )

With brass 360° swivel couplings, ideal for use in awkward access areas. Recoils to a fraction of its working length leaving the work place clear of entanglement hazards. Extended length: 7.5m. Pressure rating: 8.0mm diameter - 250psi. 9.5mm diameter - 150psi. ( ALat Alat Kerja LAinnya )